View B121EW08V0_7873311.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

p r odu c t s p ec i f i ca t ion do c u me n t v e r s ion 0 . 1 1 b121 e w 08 v 0 ( v ) p r e li m i n a r y s p ec i f i ca t i o n s ( ) f i n a l s p ec i f i ca t i o n s m od u l e 12 .1 w x g a c o l o r tf t - l cd m od e l n a m e b 121 e w 08 v 0 c u s t o m e r d a t e c h ecke d & a pp r o v e d b y no t e : t h i s s pe c i f i c a t i on i s s ub j e c t t o c hange w i t hou t no t i c e. a pp r o v e d b y d a t e p r e p a r e d b y n bb u m a r k e t i ng d i v i s i on / a u o p t r on i cs c o r po r a t i on p d f c r ea t ed w i t h pd f f a c t o r y p r o t r i a l v e r s i on www . pd ff a c t o r y . c om www.datasheet.co.kr datasheet pdf - http://www..net/
product specification document version 0.1 2 b121ew08 v0 contents 1. handling precautions..............................................................................................................4 2. general description.................................................................................................................5 2.1 general specification.........................................................................................................5 2.2 optical characteristics.......................................................................................................6 3. functional block diagram.....................................................................................................11 4. absolute maximum ratings..................................................................................................12 4.1 absolute ratings of tft lcd module..............................................................................12 4.2 absolute ratings of backlight unit...................................................................................12 4.3 absolute ratings of environment.....................................................................................12 5. electrical characteristics.......................................................................................................13 5.1 tft lcd module..............................................................................................................13 5.2 backlight unit...................................................................................................................15 6. signal characteristic.............................................................................................................17 6.1 pixel format image..........................................................................................................17 6.2 the input data format.......................................................................................................18 6.3 signal description/pin assignment..................................................................................19 6.4 interface timing................................................................................................................21 6.5 power on/off sequence...............................................................................................22 7. connector description..........................................................................................................23 7.1 tft lcd module..............................................................................................................23 7.2 backlight unit...................................................................................................................23 8. vibration and shock test......................................................................................................24 8.1 vibration test...................................................................................................................24 8.2 shock test spec:..............................................................................................................24 9. reliability................................................................................................................................25 10. mechanical characteristics.................................................................................................26 11. shipping and package.........................................................................................................28 11.1 shipping label format...................................................................................................28 11.2. carton package.............................................................................................................28 11.3 shipping package of palletizing......................................................................................28 12. appendix: edid description................................................................................................30 pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification document version 0.1 3 b121ew08 v0 record of revision version and date page old description new description remark 0.1 2007/08/13 all first edition for customer pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification document version 0.1 4 b121ew08 v0 1. handling precautions 1) since front polarizer is easily damaged, pay attention not to scratch it. 2) be sure to turn off power supply when inserting or disconnecting from input connector. 3) wipe off water drop immediately. long contact with water may cause discoloration or spots. 4) when the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. 5) since the panel is made of glass, it may break or crack if dropped or bumped on hard surface. 6) since cmos lsi is used in this module, take care of static electricity and insure human earth when handling. 7) do not open nor modify the module assembly. 8) do not press the reflector sheet at the back of the module to any directions. 9) in case if a module has to be put back into the packing container slot after once it was taken out from the container, do not press the center of the ccfl reflector edge. instead, press at the far ends of the cfl reflector edge softly. otherwise the tft module may be damaged. 10) at the insertion or removal of the signal interface connector, be sure not to rotate nor tilt the interface connector of the tft module. 11) after installation of the tft module into an enclosure (notebook pc bezel, for example), do not twist nor bend the tft module even momentary. at designing the enclosure, it should be taken into consideration that no bending/twisting forces are applied to the tft module from outside. otherwise the tft module may be damaged. 12) cold cathode fluorescent lamp in lcd contains a small amount of mercury. please follow local ordinances or regulations for disposal. 13) small amount of materials having no flammability grade is used in the lcd module. the lcd module should be supplied by power complied with requirements of limited power source(, iec60950 or ul1950), or be applied exemption. 14) the lcd module is designed so that the ccfl in it is supplied by limited current circuit(iec60950 or ul1950). do not connect the ccfl in hazardous voltage circuit. pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification document version 0.1 5 b121ew08 v0 2. general description b121ew08 v0 is a color active matrix liquid crystal display composed of a tft lcd panel, a driver circuit, and 2-ccfl backlight system. the screen format is intended to support the wxga (1280(h) x 800(v)) screen and 262k colors (rgb 6-bits data driver). all input signals are lvds interface compatible. 2.1 general specification the following items are characteristics summary on the table at 25 condition: items unit specifications screen diagonal [mm] 307.9 (12.1 w ) active area [mm] 261.12 (h) x 163.2 (v) pixels h x v 1280x3(rgb) x 800 pixel pitch [mm] 0.204 pixel arrangement r.g.b. vertical stripe display mode normally white white luminance (iccfl=6.0ma) note: iccfl is lamp current [cd/m 2 ] 500 typ. (5 points average) 425 min. (5 points average) (note1) luminance uniformity 1.25 max. (5 points) contrast ratio 600:1 typ.,500:1 min. optical rise time/fall time [msec] 25 typ., 35 max. nominal input voltage vdd [volt] +3.3 typ. power consumption [watt] 10.0 typ. (without inverter loss) weight [grams] 430g max. l w t max 276.3 180.9 7.0 typ 275.8 180.4 - physical size (w/o inverter) [mm] min 275.3 179.9 - electrical interface 1 channel lvds surface treatment anti-glare, 3h max. support color 262k colors ( rgb 6-bit ) temperature range operating storage (non-operating) [ o c] [ o c] 0 to +50 -20 to +60 rohs compliance rohs compliance pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification document version 0.1 6 b121ew08 v0 2.2 optical characteristics the optical characteristics are measured under stable conditions at 25 (room temperature): item unit conditions min. typ. max. note white luminance [cd/m 2 ] 5 points average 425 500 - 1, 4, 5. [degree] [degree] horizontal (right) cr = 10 (left) 70 70 80 80 - - viewing angle [degree] [degree] vertical (upper) cr = 10 (lower) 70 70 80 80 - - 8 luminance uniformity 5 points 1.25 1 luminance uniformity 13 points 2.00 2 cr: contrast ratio 500 600 - 6 cross talk % 1.4 7 [msec] rising - 15 20 [msec] falling - 10 15 response time [msec] rising + falling 25 35 8 red x 0.550 0.580 0.610 red y 0.310 0.340 0.370 green x 0.300 0.330 0.360 green y 0.545 0.575 0.605 blue x 0.125 0.155 0.185 blue y 0.125 0.155 0.185 white x 0.283 0.313 0.343 color / chromaticity coordinates (cie 1931) white y 0.299 0.329 0.359 2,8 ntsc % cie 1931 - 45 - pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification document version 0.1 7 b121ew08 v0 note 1: 5 points position (display area: 261.12 (h) x 163.2 (v) mm) 1 2 3 4 5 h/4 h/4 h/4 h/4 h w w/4 w/4 w/4 w/4 note 2: 13 points position w/4 w w/4 h h/4 h/4 h/4 h/4 7 9 10 w/4 1 8 w/4 10 10 10 10 2 3 13 12 4 5 6 11 note 3: the luminance uniformity of 5 and 13 points is defined by dividing the maximum luminance values by the minimum test point luminance w13 = maximum brightness of thirteen points minimum brightness of thirteen points maximum brigh tness of five points w5 = minimum brightness of five points pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification document version 0.1 8 b121ew08 v0 note 4: measurement method the lcd module should be stabilized at given temperature for 30 minutes to avoid abrupt temperature change during measuring. in order to stabilize the luminance, the measurement should be executed after lighting backlight for 30 minutes in a stable, windless and dark room. note 5 definition of average luminance of white (y l ): measure the luminance of gray level 63 at 5 points y l = [l (1)+ l (2)+ l (3)+ l (4)+ l (5)] / 5 l (x) is corresponding to the luminance of the point x at figure in note (1). note 6 definition of contrast ratio: contrast ratio is calculated with the following formula. center of the screen tft - lcd 50 cm photo detector lcd panel field=2 contrast ratio (cr)= brightness on the white state brightness on the black state pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification document version 0.1 9 b121ew08 v0 note 7 definition of cross talk (ct) ct = | y b C y a | / y a 100 (%) where y a = luminance of measured location without gray level 0 pattern (cd/m 2 ) y b = luminance of measured location with gray level 0 pattern (cd/m 2 ) note 8: definition of response time: the output signals of bm-7 or equivalent are measured when the input signals are changed from black to white (falling time) and from white to black (rising time), respectively. the response time interval between the 10% and 90% of amplitudes. refer to figure as below. "black" tr tf "white" "white" 0 % 10 % 90 % 100 % optical response pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification document version 0.1 10 b121ew08 v0 note 9: definition of viewing angle viewing angle is the measurement of contrast ratio R 10, at the screen center, over a 180 horizontal and 180 vertical range (off-normal viewing angles). the 180 viewing angle range is broken down as follows; 90 ( ) horizontal left and right and 90 ( ) vertical, high (up) and low (down). the measurement direction is typically perpendicular to the display surface with the screen rotated about its center to develop the desired measurement viewing angle. pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification document version 0.1 11 b121ew08 v0 3. functional block diagram the following diagram shows the functional block of the 12.1 inches wide color tft/lcd module. tft array/cell vdd lcd controller lcd drive card backlight unit 1280(r/g/b) x 3 gnd dc-dc converter ref circuit y-driver x-driver rxin0 rxin1 rxin2 rxclkin (4 pairs lvds) 2 lamp connector (2pin each) pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification document version 0.1 12 b121ew08 v0 4. absolute maximum ratings absolute maximum ratings of the module are as following: 4.1 absolute ratings of tft lcd module item symbol min max unit conditions logic/ lcd drive vdd 2.8 3.8 [volt] note 1,2 4.2 absolute ratings of backlight unit item symbol min max unit conditions ccfl current iccfl 5.0 6.0 [ma] rms note 1,2 4.3 absolute ratings of environment item symbol min max unit conditions operating temperature top 0 +50 [ o c] note 3 operation humidity hop 5 95 [%rh] note 3 storage temperature tst -20 +60 [ o c] note 3 storage humidity hst 5 95 [%rh] note 3 note 1: at ta (25 ) note 2: permanent damage to the device may occur if exceed maximum values note 3: for quality performance, please refer to auo iis(incoming inspection standard). twb=39 c operating range storage range pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification document version 0.1 13 b121ew08 v0 5. electrical characteristics 5.1 tft lcd module 5.1.1 power specification input power specifications are as follows; symble parameter min typ max units note vdd logic/lcd drive voltage 3.0 3.3 3.6 [volt] pdd vdd power 0.9 1.1 [watt] note 1, 2 idd idd current 270 370 [ma] note 1, 2 irush inrush current 1000 [ma] note 3 vddrp allowable logic/lcd drive ripple voltage 100 [mv] p-p note 1 : maximum measurement condition black pattern note 2 typical measurement condition: mosaic pattern note 3 measure condition q3 ao6402 g d2 s d1 d5 d6 c3 0.01uf/25v c2 1uf/25v c1 1uf/16v q3 ao6402 g d2 s d1 d5 d6 f1 vr1 47k +12.0v vcc sw1 sw mag-spst 1 2 (lcd module input) (high to low) control signal r2 1k r2 1k r1 47k +3.3v 90% 10% vin rising time 0v 3.3v 0.5ms pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification document version 0.1 14 b121ew08 v0 5.1.2 signal electrical characteristics input signals shall be low or high-impedance state when vdd is off. signal electrical characteristics are as follows ; parameter condition min max unit vth differential input high threshold (vcm=+1.2v) 100 [mv] vtl differential input low threshold (vcm=+1.2v) -100 [mv] vcm differential input common mode voltage 1.125 1.375 [v] note: lvds differential voltage pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification document version 0.1 15 b121ew08 v0 5.2 backlight unit parameter guideline for ccfl inverter parameter min typ max units condition ccfl current each lamp (i ccfl ) 5.0 5.5 6.0 [ma] rms (ta=25) note 2 ccfl frequency(f ccfl ) 45 55 65 [khz] (ta=25) note 3,4 ccfl startup voltage(v s ) 1150 1400 [volt] rms (ta= 0) note 5 ccfl startup voltage(v s ) 920 1110 [volt] rms (ta= 25) note 5 ccfl voltage (reference) (v ccfl ) 550 [volt] rms (ta=25) note 6 ccfl power consumption for 2 lamp (p ccfl ) - - 7.8 [watt] (ta=25) note 6 note 1: typ are auo recommended design points. *1 all of characteristics listed are measured under the condition using the auo test inverter. *2 in case of using an inverter other than listed, it is recommended to check the inverter carefully. sometimes, interfering noise stripes appear on the screen, and substandard luminance or flicker at low power may happen. *3 in designing an inverter, it is suggested to check safety circuit very carefully. impedance of ccfl, for instance, becomes more than 1 [m ohm] when cfl is damaged. *4 generally, ccfl has some amount of delay time after applying kick-off voltage. it is recommended to keep on applying kick-off voltage for 1 [sec] until discharge. *5 ccfl discharge frequency must be carefully chosen so as not to produce interfering noise stripes on the screen. *6 reducing ccfl current increases ccfl discharge voltage and generally increases ccfl discharge frequency. so all the parameters of an inverter should be carefully designed so as not to produce too much leakage current from high-voltage output of the inverter. note 2: it should be employed the inverter which has duty dimming , if iccfl is less than 4ma. note 3: ccfl discharge frequency should be carefully determined to avoid interference between inverter and tft lcd. note 4: the frequency range will not affect to lamp life and reliability characteristics. note 5: ccfl inverter voltage should be able to give out a power that has a generating capacity larger than the lamp startup voltage, otherwise backlight may has blinking for a moment after turns on or can not be turned on. pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification document version 0.1 16 b121ew08 v0 note 6: calculator value for reference (i ccfl v ccfl =p ccfl ) note 7: requirements for a system inverter design, which is intended to have a better display performance, a better power efficiency and a more reliable lamp, are following. it shall help increase the lamp lifetime and reduce leakage current. a. the asymmetry rate of the inverter waveform should be less than 10%. b. the distortion rate of the waveform should be within 2 10%. * inverter output waveform had better be more similar to ideal sine wave. note 8: it is an edge-type blu with dual ccfl, the life-time define as the brightness decay to 50% of original value and under normal operation. pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification document version 0.1 17 b121ew08 v0 6. signal characteristic 6.1 pixel format image following figure shows the relationship of the input signals and lcd pixel format. r g b r g b r g b r g b r g b r g b r g b r g b 0 1 1278 1279 1st line 800th line pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification document version 0.1 18 b121ew08 v0 6.2 the input data format signal name description +red5 (r5) +red4 (r4) +red3 (r3) +red2 (r2) +red1 (r1) +red0 (r0) red data 5 (msb) red data 4 red data 3 red data 2 red data 1 red data 0 (lsb) (red-pixel data) red-pixel data each red pixel's brightness data consists of these 6 bits pixel data. +green 5 (g5) +green 4 (g4) +green 3 (g3) +green 2 (g2) +green 1 (g1) +green 0 (g0) green data 5 (msb) green data 4 green data 3 green data 2 green data 1 green data 0 (lsb) (green-pixel data) green-pixel data each green pixel's brightness data consists of these 6 bits pixel data. +blue 5 (b5) +blue 4 (b4) +blue 3 (b3) +blue 2 (b2) +blue 1 (b1) +blue 0 (b0) blue data 5 (msb) blue data 4 blue data 3 blue data 2 blue data 1 blue data 0 (lsb) (blue-pixel data) blue-pixel data each blue pixel's brightness data consists of these 6 bits pixel data. -dtclk data clock the typical frequency is 71.1 mhz. the signal is used to strobe the pixel data and dsptmg signals. all pixel data shall be valid at the falling edge when the dsptmg signal is high. dsptmg (de) display timing this signal is stored at the falling edge of -dtclk. when the signal is high, the pixel data shall be valid to be displayed. vsync (vs) vertical sync the signal is synchronized to -dtclk . hsync (hs) horizontal sync the signal is synchronized to -dtclk . note: output signals from any system shall be low or high-impedance state when vdd is off. pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification document version 0.1 19 b121ew08 v0 6.3 signal description/pin assignment lvds is a differential signal technology for lcd interface and high speed data transfer device. pin signal name description 1 gnd ground 2 vdd +3.3v power supply 3 vdd +3.3v power supply 4 v edid +3.3v edid power 5 nc no connection (bist enable) 6 clk edid edid clock input 7 data edid edid data input 8 rxin0- lvds differential data input(r0-r5, g0) 9 rxin0+ lvds differential data input(r0-r5, g0) 10 gnd ground 11 rxin1- lvds differential data input(g1-g5, b0-b1) 12 rxin1+ lvds differential data input(g1-g5, b0-b1) 13 gnd ground 14 rxin2- lvds differential data input(b2-b5, hs, vs, de) 15 rxin2+ lvds differential data input(b2-b5, hs, vs, de) 16 gnd ground 17 rxclkin- lvds differential clock input 18 rxclkin+ lvds differential clock input 19 gnd ground 20 nc no connection pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification document version 0.1 20 b121ew08 v0 note1: start from right side note2: input signals shall be low or high-impedance state when vdd is off. internal circuit of lvds inputs are as following. the module uses a 100ohm resistor between positive and negative data lines of each receiver input r r r r lvds receiver signal input pin no. 9 11 12 14 15 17 18 8 rxin0+ rxin0- rxin1+ rxin1- rxin2+ rxin2- rxclkin+ rxclkin- pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification document version 0.1 21 b121ew08 v0 6.4 interface timing 6.4.1 timing characteristics basically, interface timings should match the 1280x800 /60hz manufacturing guide line timing. parameter symbol min. typ. max. unit frame rate - 50 60 - hz clock frequency 1/ t clock 62 68 72 mhz period t v 803 816 832 active t vd 800 800 800 vertical section blanking t vb 3 16 32 t line period t h 1302 1408 1700 active t hd 1280 1280 1280 horizontal section blanking t hb 22 2 420 t clock end-frame checking period tef 2 t line de checking period tde 6400 t line note : de mode only 6.4.2 timing diagram dotclk de t h t hb t hd de t v t vb t vd input timing definition ( de mode) t clock input data pixel 1 pixel 2 pixel 3 pixel n-1 pixel n invaild data invaild data pixel 1 pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification document version 0.1 22 b121ew08 v0 6.5 power on/off sequence vdd power and lamp on/off sequence is as follows. interface signals are also shown in the chart. signals from any system shall be hi-z state or low level when vdd is off. power sequence timing value parameter min. typ. max. units t1 0.5 - 10 (ms) t2 0 - 50 (ms) t3 0 - 50 (ms) t4 400 - - (ms) t5 200 - - (ms) t6 200 - - (ms) t7 0 - 10 (ms) t4 t3 t2 t5 valid data t1 10% 90% 10% 90% t6 t 7 power supply vdd lvds interface backlight on pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification document version 0.1 23 b121ew08 v0 7. connector description physical interface is described as for the connector on module. these connectors are capable of accommodating the following signals and will be following components. 7.1 tft lcd module connector name / designation for signal connector (lvds) manufacturer hirose type / part number df19la-20p-1h mating housing/part number df19g-20s-1c or compatible 7.2 backlight unit physical interface is described as for the connector on module. these connectors are capable of accommodating the following signals and will be following components. connector name / designation for lamp connector manufacturer jst type / part number bhsr-02vs-1 mating type / part number sm02b-bhss-1-tb since b121ew08 is a dual-ccfl model, there will be 2 connectors for ccfl, each a high voltage end and a low voltage end. pin # cable color signal name 1 red/ blue lamp high voltage 2 white lamp low voltage pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification document version 0.1 24 b121ew08 v0 8. vibration and shock test 8.1 vibration test test spec: l test method: non-operation l acceleration: 1.5g , sine wave l frequency: 10 - 500hz random l sweep: 0.5 octave/minute in each of three mutually perpendicular axes. 8.2 shock test spec: test spec: l test method: non-operation l acceleration: 220 g , half sine wave l active time: 2 ms l pulse: half sine wave pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification document version 0.1 25 b121ew08 v0 9. reliability subject description operating high temperature +50 ,dynamic ,250hr ,humity 20% operating low temperature 0 ,dynamic ,250hr ,humity 20% storage high temperature +65 ,non_operating ,250hr ,humity 20% storage low temperature -20 ,non_operating ,250hr high temp &high humidity +40 ,dynamic ,humidity 95% ,250hr temperature cycling non-operating -40 to +65 ,ramp< 20 /min, duration at temp. = 30 min, test cycles =50 altitude op(0~14000 ft) non-op (0~40000ft) mtbf 200k hrs storage shock 180g s, 2.0 ms, half sine wave 3 axis ( +x, -x, +y, -y, +z, -z) 1shocks per direction storage vibration 1.5 grms, 30 min/side, psd spectrum break points, 26 hz g2/hz=0.316, 50 hz g2/hz=0.007, 222 hz g2/hz=0.0018, 500hz g2/hz=0.0001 esd contact : 8 kv air : 15 kv note1: according to en61000-4-2 , esd class b: some performance degradation allowed. no data lost. self-recoverable. no hardware failures. note2: mtbf (excluding the ccfl): 30,000 hours with a confidence level 90%. pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification document version 0.1 26 b121ew08 v0 10. mechanical characteristics 10.1 lcm outline dimension pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification document version 0.1 27 b121ew08 v0 pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification document version 0.1 28 b121ew08 v0 11. shipping and package 11.1 shipping label format auo lcd s/n label: this label records the model name, firmware/ hardware version, manufacture date, and serial number of the lcd in auo. h/w: 0a f/w:1 pb c us e204356 rohs manufactured 05/52 model no: b121ew08 au optronics made in taiwan (m1) v0 0axxg 11.2. carton package the outside dimension of carton is 423(l)mm* 374(w)mm* 335(h)mm, carton and cushion weight are 1800g. maximum quantity of each carton is 15 pcs of lcd. 35 mm 90 mm pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification document version 0.1 29 b121ew08 v0 11.3 shipping package of palletizing pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/
product specification document version 0.1 30 b121ew08 v0 12. appendix: edid description tbd pdf created with pdffactory pro trial version www.pdffactory.com www.datasheet.co.kr datasheet pdf - http://www..net/

▲Up To Search▲

Price & Availability of B121EW08V0

	To Download B121EW08V0 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .